Devon EX13 5XQ
Equestrian & Smallholding Solutions
Trailed Livestock Feeder
The TF350 Trailed Livestock Feeder features fully galvanised all-
Don’t mess around with bagged feed and troughs, the TF350 Livestock Feeder / Sheep Snacker allows you to drop the right amount of feed in the right place each time. Drop size is variable from 0.5kg to 2kg (approx), and drop spacing is controlled by the forward speed of the ATV, UTV or Quad. The digital counter ensure you know exactly how much has been deposited, and allows you to focus on checking stock condition. Operable as either a coun-
The electronic drive system on the TF350 stock feeder has few moving parts, and only rotates when in operation, reducing wear and tear, and allowing towing over longer distances. All electronic components are IP67 rated, for use in the toughest conditions. Operation is simple even when wearing thick winter gloves, and the large , brightly backlit display is easy to read even in the worst conditions. The countdown function is ideal for reliably dropping exactly the right amount of feed and freeing the operator to focus solely on checking stock condition. The control unit when off consumes minimal power, so will not flatten batteries if hard-
The TF350 triailed sheep feeder by Chapman Machinery is designed to be exceptionally strong, yet lightweight enough for use in wet, wintery conditions. Steel, fully galvanised chassis and hopper are extremely heavy duty, yet light to tow. Steel will not fade, become brittle and crack as plastic hoppers can! Conventional drum-
Oversize Tyres – 25x13x9″ Balloon Traction tyres in place of standard 22x11x8″ for improved grip on steep slopes, higher ground clearance and lower ground pressure. Other sizes are available to suit specific applications, please contact us or your nearest distributor for details
Extension Sides – Increases hopper capacity by 0.25m^3 (200kg) per extension. Bolt-
Nudge Bar – Livestock fender bars wraps around front of machine and back to mudguards to keep livestock from becoming jammed between towing vehicle and feeder when feeding. Especially suited for feeding sheep.
Twin Axle – Twin beam axles in place of standard axles assemblies for smoother towing over rough terrain and reduced ground pressure. Note: This option requires removal of mudguards.
Hard Top Bale Rack – Galvanised steel lid in place of standard welded PVC tonneau cover. Can be used for carrying small bales of straw or haylage.
Additional Control Box – Additional control box to allow machine to be used behind an additional towing vehicle without swapping the control electrics over – ideal if the feeder is used behind multiple vehicles, eg. ATV and 4×4.
Suspension Axles and Road Tyres – Suspension axles and E-
Standard: 320 litre (aprox. 300kg feed)
w/ Extension Sides: 550litre (approx 500kg Feed)
Weight 130kg (Unladen)
w/ 25x13x9 Oversize Tyre Option: 350mm
Drops per minute 25
Drop size 0.25-
Supply Voltage 13.8V Nominal [10v / 18v (min / max)]
Operating Temperature -
Incorrect Polarity Protection Yes
Overload Thermal Rest Time 30 seconds
Tyre Size 22x11x8″ or 25x13x9″ (optional)